EQInterface Forums

EQInterface Forums (http://www.eqinterface.com/forums/index.php)
-   Request (http://www.eqinterface.com/forums/forumdisplay.php?f=22)
-   -   Spike Spin Aura (http://www.eqinterface.com/forums/showthread.php?t=21109)

Kailihn 12-29-2011 03:55 PM

Spike Spin Aura
 
original

Could someone update this to work with current UI coding?

I miss it! :eek:

valaury3169 12-29-2011 04:25 PM

1 Attachment(s)
Try the attached. I compared the .ini one that I know works, and made some adjustments. I think the main thing was that markers 4-6 were not defined.

If it doesn't work, then it is something beyond my skills.

Good luck :)

Dimencia 12-30-2011 12:15 AM

This is the Ring I used in Deltax Forever, just rip it out of there.

Kailihn 12-30-2011 08:25 PM

Target once more!
 
Thank you soooooo much!

It works perfectly!

XOXO

Kai

Kailihn 01-07-2012 02:03 PM

Intermittent spikes
 
The odd thing is that sometimes it will still give me the smoky target ring and not the spikes. Any ideas what might cause that? I can click on my group and 4 of the 5 show spike ring, and consistently one person will show the default.

Dimencia 01-07-2012 09:07 PM

Quote:
Originally Posted by Kailihn
The odd thing is that sometimes it will still give me the smoky target ring and not the spikes. Any ideas what might cause that? I can click on my group and 4 of the 5 show spike ring, and consistently one person will show the default.


not 100% sure but from what i have seen over the years it seems to be a directx issue or memory leak that lingers and becomes progressive the longer eq has been running and most common after reloading the UI a couple times.

pintoy 01-08-2012 10:42 AM

A problem I encountered with a custom target ring recently, some mobs had a smoky ring instead of the custom ring. The issue was sony added another con level. It's either between dk blue and lt blue or lt blue and even. I forget exactly. So when targeting a mob with the new con the ring defaulted to smoky. The new con had to be separately defined. Hope this helps.

valaury3169 01-09-2012 09:01 AM

1 Attachment(s)
Pintoy was exactly correct. There was a level of con that was not defined in the .ini that I included. Here is the corrected files.

Kailihn 01-10-2012 06:31 PM

When I try to copy these 3 files it won't allow me to copy the TGA files, I get an unspecified error :confused:

I'm hoping the ini file is the only real change I need and it will work with the other TGA files I have.

valaury3169 01-11-2012 11:39 AM

1 Attachment(s)
Yes, the only thing I changed was the .ini file. Weird that it broke the tga files. I do use Power Archiver here at work... which a bit ole piece of junk.

Just in case, I rezipped and attached.


All times are GMT -5. The time now is 04:49 AM.

vBulletin Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.