EQInterface Forums - Suggestion: How to reverse the gauge drain direction

EQInterface Forums (http://www.eqinterface.com/forums/index.php)

- XML modification help. (http://www.eqinterface.com/forums/forumdisplay.php?f=30)

- - Suggestion: How to reverse the gauge drain direction (http://www.eqinterface.com/forums/showthread.php?t=488)

psychogears

08-01-2002 02:35 PM

Suggestion: How to reverse the gauge drain direction

Has anyone tried swapping the background of the gauge and the gauge fill pictures? I was thinking about this, and I think if you do this, the gauge fill picture would be the background, and the background would be what fills gauges... you can do this to create gauges that look like they fill from right to left, instead of drain from left to right... if someone wanted to do this for a fatigue gauge mod, it would make sense since the % is reversed as well.

Kalthanan

08-01-2002 09:14 PM

What about..

What about filling from bottom to top, or top to bottom?
Would that be possible?

Kal

Mafoo

08-05-2002 01:19 PM

Hmmmm

I See your point Pshyco, this would only work on the main gauge not any sub bars..
I shall see what i can invent!

Mafoo

08-05-2002 01:45 PM

Well

The hicups i ran into -
>you must disable the fill tint
>you are going to have to use a custom picture already coloured for the 'filled bars' as you cannot tint the background

with this in mind i think VT should at this tag set

Code:


		<BackTint>
				<R>240</R>
				<G>0</G>
				<B>0</B>
		</BackTint>

also this would be handy

Code:


		<EndCapTint>
				<R>240</R>
				<G>0</G>
				<B>0</B>
		</EndCapTint>

All times are GMT -5. The time now is 07:30 PM.