EQInterface Forums - View Single Post - Target Indicator not showing

Fixed on one of my two systems. Read this in the Sony thread and tried it and it works for me on the WinXP system with a ti4600 card.

Add these 2 lines exactly as is to your eqclient.ini file:

UseTNL=1
Show3dTargetIndicator=1

You may not have either line or they might be set to 0 (off). Add them if they're missing.

My file had UseTNL set to 0, once I set it to 1, it worked.

This fix did not work on my other system with a SiS video chip onboard though.

11-06-2003, 04:40 PM	#37
Mutley An Icepaw Kobold Join Date: Sep 2002 Posts: 81	Fixed on one of my two systems. Read this in the Sony thread and tried it and it works for me on the WinXP system with a ti4600 card. Add these 2 lines exactly as is to your eqclient.ini file: UseTNL=1 Show3dTargetIndicator=1 You may not have either line or they might be set to 0 (off). Add them if they're missing. My file had UseTNL set to 0, once I set it to 1, it worked. This fix did not work on my other system with a SiS video chip onboard though.