Halelen

Ok first chance I have had to look at it and play with it in game..you have your math all wrong. so start by editing out all the layers and start 1 at a time. First for the gray it doesn't need to be a layer just change the regular bar color to be gray . then add in the first layer your math is all wrong remember that the offset is 10000 - % - gauge length. now that you have that you can change 10000 to 13800 if you want as was suggested. remember for the first layer you want the cover to be 60% and the actual countdown 39%..once you get that working add second layer you want cover to 99% and countdown 1%. I have some things to do but will check in on you later.


Hal