Ok, the way I hide the borders is to make a new Template. In the EQUI_ChatWindow.xml file, above the <STMLBox item = "CW_ChatOutput"> (preferably add this at the top of the file after the XML header but before any other pieces)
<Ui2DAnimation item = "A_InvisibleInnerFrame">
<Cycle>true</Cycle>
<Frames>
<Texture>window_pieces01.tga</Texture>
<Location>
<X>0</X>
<Y>0</Y>
</Location>
<Size>
<CX>4</CX>
<CY>4</CY>
</Size>
<Hotspot>
<X>0</X>
<Y>0</Y>
</Hotspot>
<Duration>1000</Duration>
</Frames>
</Ui2DAnimation>
<WindowDrawTemplate item = "WDT_ChatInner">
<Background>wnd_bg_dark_rock.tga</Background>
<VSBTemplate>
<UpButton>
<Normal>A_VSBUpNormal</Normal>
<Pressed>A_VSBUpPressed</Pressed>
<Flyby>A_VSBUpFlyby</Flyby>
<Disabled>A_VSBUpDisabled</Disabled>
<PressedFlyby>A_VSBUpPressedFlyby</PressedFlyby>
</UpButton>
<DownButton>
<Normal>A_VSBDownNormal</Normal>
<Pressed>A_VSBDownPressed</Pressed>
<Flyby>A_VSBDownFlyby</Flyby>
<Disabled>A_VSBDownDisabled</Disabled>
<PressedFlyby>A_VSBDownPressedFlyby</PressedFlyby>
</DownButton>
<Thumb>
<Top>A_VSBThumbTop</Top>
<Bottom>A_VSBThumbBottom</Bottom>
<Middle>A_VSBThumbMiddle</Middle>
<OverlapLeft>0</OverlapLeft>
<OverlapTop>0</OverlapTop>
<OverlapRight>0</OverlapRight>
<OverlapBottom>0</OverlapBottom>
</Thumb>
<MiddleTextureInfo>scrollbar_gutter.tga</MiddleTextureInfo>
<MiddleTint>
<Alpha>255</Alpha>
<R>128</R>
<G>128</G>
<B>128</B>
</MiddleTint>
</VSBTemplate>
<HSBTemplate>
<UpButton>
<Normal>A_HSBLeftNormal</Normal>
<Pressed>A_HSBLeftPressed</Pressed>
<Flyby>A_HSBLeftFlyby</Flyby>
<Disabled>A_HSBLeftDisabled</Disabled>
<PressedFlyby>A_HSBLeftPressedFlyby</PressedFlyby>
</UpButton>
<DownButton>
<Normal>A_HSBRightNormal</Normal>
<Pressed>A_HSBRightPressed</Pressed>
<Flyby>A_HSBRightFlyby</Flyby>
<Disabled>A_HSBRightDisabled</Disabled>
<PressedFlyby>A_HSBRightPressedFlyby</PressedFlyby>
</DownButton>
<Thumb>
<Right>A_HSBThumbRight</Right>
<Left>A_HSBThumbLeft</Left>
<Middle>A_HSBThumbMiddle</Middle>
<OverlapLeft>0</OverlapLeft>
<OverlapTop>0</OverlapTop>
<OverlapRight>0</OverlapRight>
<OverlapBottom>0</OverlapBottom>
</Thumb>
<MiddleTextureInfo>scrollbar_gutter.tga</MiddleTextureInfo>
<MiddleTint>
<Alpha>255</Alpha>
<R>128</R>
<G>128</G>
<B>128</B>
</MiddleTint>
</HSBTemplate>
<CloseBox>
<Normal>A_CloseBtnNormal</Normal>
<Pressed>A_CloseBtnPressed</Pressed>
<Flyby>A_CloseBtnFlyby</Flyby>
<Disabled>A_CloseBtnDisabled</Disabled>
<PressedFlyby>A_CloseBtnPressedFlyby</PressedFlyby>
</CloseBox>
<MinimizeBox>
<Normal>A_MinimizeBtnNormal</Normal>
<Pressed>A_MinimizeBtnPressed</Pressed>
<Flyby>A_MinimizeBtnFlyby</Flyby>
<Disabled>A_MinimizeBtnDisabled</Disabled>
<PressedFlyby>A_MinimizeBtnPressedFlyby</PressedFlyby>
</MinimizeBox>
<TileBox>
<Normal>A_TileBtnNormal</Normal>
<Pressed>A_TileBtnPressed</Pressed>
<Flyby>A_TileBtnFlyby</Flyby>
<Disabled>A_TileBtnDisabled</Disabled>
<PressedFlyby>A_TileBtnPressedFlyby</PressedFlyby>
</TileBox>
<Border>
<TopLeft>A_InvisibleInnerFrame</TopLeft>
<Top>A_InvisibleInnerFrame</Top>
<TopRight>A_InvisibleInnerFrame</TopRight>
<RightTop>A_InvisibleInnerFrame</RightTop>
<Right>A_InvisibleInnerFrame</Right>
<RightBottom>A_InvisibleInnerFrame</RightBottom>
<BottomRight>A_InvisibleInnerFrame</BottomRight>
<Bottom>A_InvisibleInnerFrame</Bottom>
<BottomLeft>A_InvisibleInnerFrame</BottomLeft>
<LeftTop>A_InvisibleInnerFrame</LeftTop>
<Left>A_InvisibleInnerFrame</Left>
<LeftBottom>A_InvisibleInnerFrame</LeftBottom>
<OverlapLeft>0</OverlapLeft>
<OverlapTop>0</OverlapTop>
<OverlapRight>0</OverlapRight>
<OverlapBottom>0</OverlapBottom>
</Border>
<Titlebar>
<Right>A_WindowTitleRight</Right>
<Left>A_WindowTitleLeft</Left>
<Middle>A_WindowTitleMiddle</Middle>
<OverlapLeft>0</OverlapLeft>
<OverlapTop>0</OverlapTop>
<OverlapRight>0</OverlapRight>
<OverlapBottom>0</OverlapBottom>
</Titlebar>
</WindowDrawTemplate>
Then for <DrawTemplate>WDT_Inner</DrawTemplate> under the ChatOutput replace WDT_Inner with WDT_ChatInner
Take note that this can all be done within the EQUI_ChatWindow.xml file, fo not make changes to the Animations or Templates file (preferably ever).
Haliken Schmaliken
I hope the XML coding shows up correctly =/
Check out my UI at
http://www.eqgui.com/showthread.php?s=&threadid=2507