EQInterface Forums - 3d Target ring mods not working

06-06-2022, 03:27 PM	#1
LamahHerder A Fire Beetle Join Date: Nov 2016 Posts: 3	3d Target ring mods not working I always just have the default eq target ring regardless of what UI I load. The default eq target ring is just a single color texture I've tried 5 different ones from the 3d target ring downloads as well as entire UI's all of which are updated in 2022 or newer 1 - delete eqclient.ini (incase I had something disabling it) 2 - Place targetindicator.ini + images from download into .\uifiles\testring 3 - Load game, make sure "Show 3D Target Ring" is checked in Options>Display 4 - Load UI via /load testring or via the Options menu

07-06-2022, 08:22 AM

Dastinar

A Ghoul

Join Date: Mar 2003

Posts: 18

Quote:

Originally Posted by LamahHerder

I've tried 5 different ones from the 3d target ring downloads as well as entire UI's all of which are updated in 2022 or newer

1 - delete eqclient.ini (incase I had something disabling it)
2 - Place targetindicator.ini + images from download into .\uifiles\testring
3 - Load game, make sure "Show 3D Target Ring" is checked in Options>Display
4 - Load UI via /load testring or via the Options menu

Depending on what version of Windows your running (and maybe also where EQ is installed), you may need to go into the properties of 'eqgame.exe' and under compatibility set it to run as administrator.

In the past the 3D Target Ring I made stopped working until I did that though I just recently tried it again without the administrator settings for eqgame.exe and it worked correctly.

I'm on latest update of Windows 10 with EQ installed in the latest default location (C:\Users\Public\Daybreak Game Company\Installed Games\EverQuest).

Not sure what else you can check but good luck!

08-27-2022, 10:52 AM	#3
krowebar ScareKrowe Join Date: Dec 2003 Posts: 16	Have you tried doing: /indicator off then /indicator on ?

08-28-2022, 03:06 PM	#4
Banchicawawo A Bat Join Date: Sep 2002 Posts: 1	zone once after loading 3D Target ring You need to zone after loading the 3D Target ring. For some reason, if you load the UI, everything will load EXCEPT for the targeting ring. Once you zone for the first time after loading it, it should show the correct target ring. This took me a long time to figure out, and someone else pointed it out to me, and ever since I've had no issues with the 3D Targeteting rings.