MotorCityMage

man this is a sweet ring would love to see my guild name though! if i could borrow a few minutes of your time could you please make one with War Raiders of Bertoxxulous or if that is too large just War Raiders would be fine...thanks in advance!

ryknow774

Having issues using this targeting ring. Any dark blue con mob the ring will show up as white, not as the normal white either but the default EQ white targeting ring. It's almost like there is no dark blue con included with this targeting ring. Any way to fix this? I really love this ring and you did a great job on it..Thanks in advance

jchapin11

I read in the settings file you were having a problem adjusting the twistspeed. You were getting a "pulsing" effect. I noticed you were only taking the value to the tenths position so I took it a little further (to the thousandths) and got a very nice slow spin. The problem was that it was spinning faster than the framrate was allowing which is where the "pulse" came from.

The original file looks like this:

TwistSpeed=0.00

Set is so it looks like one of these:

TwistSpeed=-0.001

TwistSpeed=-0.002

TwistSpeed=-0.003

TwistSpeed=-0.004

TwistSpeed=-0.005

I used a negative value in order to give it a clockwise spin so the words were not going backwards.

I used the -0.001 values on the con rings and I used the -0.002 value on the assist markers so they stand out from each other a bit. You can use a higher value then the ones I have listed but it starts to go too fast and depending on the video card you are using you will begin to get the "pulse". If you want to change the rotation of any of the rings simply remove the - before the numbers so it looks like this:

TwistSpeed=0.001

I hope this helps anyone who wants to add a nice slow steady spin to the rings.

Overall, great design. Thank you.

zashso

Really Liked this target ring. I can see target and the graphics are really well done. Thanks Caeddar.